ترانزیستور دو قطبی ، Transistor MП41A


20,000 تومان

موجود در انبار

  • گارانتی اصالت و سلامت فیزیکی کالا
  • آماده ارسال از انبار

توضیحات

MP41A
ترانزیستورهای MP41A آلیاژ ژرمانیوم pnp تقویت فرکانس پایین
برای تقویت سیگنال های فرکانس پایین طراحی شده است.
آنها در یک پوشش شیشه به فلز با لیدهای انعطاف پذیر تولید می شوند.
تعیین نوع در کنار محفظه نشان داده شده است.
جرم ترانزیستور بیش از 2 گرم نیست.
نوع بسته بندی: KTYu-3-6
مشخصات: aA0.336.635TUM مشخصات فنی ترانزیستور MP41A
ساختار ترانزیستور: pnp
Рк max – توان اتلاف ثابت جمع کننده: 150 مگاوات
fh21b – محدود کردن فرکانس نسبت انتقال جریان ترانزیستور برای مدارهای دارای یک فرستنده مشترک و یک پایه مشترک: کمتر از 1 مگاهرتز
نمونه های Uker – انتشار دهنده ولتاژ خرابی در یک جریان جمع کننده مشخص و یک مقاومت (نهایی) داده شده در مدار مبدل پایه: 15 ولت
نمونه های Uebo – پایه امیتر ولتاژ خرابی در جریان معکوس معینی از انتشار دهنده و مدار جمع کننده باز: 10 ولت
Ik max – حداکثر جریان جمع کننده ثابت مجاز: 30 میلی آمپر
Ic و حداکثر – حداکثر جریان جمع کننده پالس مجاز: 150 میلی آمپر
Ikbo – جریان جمع کننده معکوس – جریان از محل اتصال جمع کننده در یک ولتاژ معکوس پایه جمع کننده و یک ترمینال انتشار دهنده باز: بیش از 15 μA
h21e – ضریب انتقال جریان استاتیک ترانزیستور در حالت سیگنال کوچک برای مدارهای دارای یک فرستنده مشترک و یک پایه مشترک ، به ترتیب: 50 … 100
CK – ظرفیت محل اتصال جمع کننده: بیش از 50 pF نیست
MP41A
Transistors MP41A alloyed germanium pnp amplifying low-frequency with non-standardized noise figure
Designed to amplify low frequency signals
They are produced in a glass-to-metal casing with flexible leads
The type designation is shown on the side of the housing
The mass of the transistor is no more than 2 g
Package type: KTYu-3-6
Specifications: aA0.336.635TUMain technical characteristics of the MP41A transistor
Transistor structure: pnp
Рк max – Constant dissipated power of the collector: 150 mW
fh21b – Limiting frequency of the transistor current transfer ratio for circuits with a common emitter and a common base: not less than 1 MHz
Uker samples – Breakdown voltage collector-emitter at a given collector current and a given (final) resistance in the base-emitter circuit: 15 V
Uebo samples – Breakdown voltage emitter-base at a given reverse current of the emitter and open collector circuit: 10 V
Ik max – Maximum permissible constant collector current: 30 mA
Ic and max – Maximum allowable pulse collector current: 150 mA
Ikbo – Reverse collector current – current through the collector junction at a given collector-base reverse voltage and an open emitter terminal: no more than 15 μA
h21e – Static current transfer coefficient of the transistor in the small signal mode for circuits with a common emitter and a common base, respectively: 50 … 100
CK – Collector junction capacity: no more than 50 pF

Technical characteristics of transistors MP41, MP41A

Transistor type Structure Limit values ​​of parameters at Тп = 25 ° С Parameter values ​​at Тп = 25 ° С
I K . Max I K . and. Max U FE R max
(U CEO max)
U EBO max P K . Max.
(R K. And. Max)
h21E U KB
(U CE )
I E
(I K )
U ke us I KBO fgp
mA mA IN IN mW IN mA IN μA MHz
MP41 pnp thirty 150 15 ten 150 30 … 60 5 one 15 one
MP41A pnp thirty 150 15 ten 150 50 … 100 5 one 15 one

Symbols of electrical parameters of transistors
 Ik. max – the maximum permissible direct current of the transistor collector
 Ik. and. max – the maximum permissible pulse current of the transistor collector
 Uke the R . max is the maximum voltage between the collector and the emitter at a given (final) resistance in the base-emitter circuit of the transistor
 Ukeo. max – the maximum voltage between the collector and the emitter of the transistor with an open circuit of the base and a given emitter current
Uebo. max is the maximum permissible constant emitter-base voltage at a collector current of zero
Rk. max is the maximum permissible constant power dissipated on the collector of the transistor
Rk. and. max – the maximum allowable pulse power dissipated on the collector of the transistor
h 21 E – static current transfer coefficient of the bipolar transistor
h 21E  – current transfer coefficient of a bipolar transistor in the small signal mode in a circuit with a common emitter
Ukb is the collector-base voltage of the transistor
Uke the R . max is the maximum voltage between the collector and the emitter at a given (final) resistance in the base-emitter circuit of the transistor
Ie is the emitter current of the transistor
– constant current of the transistor collector
Uke. us. – the saturation voltage between the collector and the emitter of the transistor
Ikbo – collector reverse current. The current through the collector junction at a given collector-base reverse voltage and an open emitter terminal
fgr – cutoff frequency of the current transfer ratio
fh 21  is the limiting frequency of the current transfer ratio of the bipolar transistor

Characteristics, parameters, diagram, description

MP41A

Specifications; Datasheet:Download PDF file

نقد و بررسی‌ها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین کسی باشید که دیدگاهی می نویسد “ترانزیستور دو قطبی ، Transistor MП41A”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

چهار + 3 =