رله الکترو مغناطیسی ، Electromagnetic relay РЭН 29

Direct current electromagnetic leaky relay with two changeover contacts
The relay is intended for switching AC and DC electric circuits with a frequency of 50-1100 Hz

FEATURES
Switches current from 5 · 10-5 A to 5A
The mass of the relay is not more than 130 g
Technical conditions RF0.450.016 TU

Technical parameters and performance characteristics

SUPPLY VOLTAGE: according to table 1
SWITCHING MODES: according to table 2
CONTACT RESISTANCE: ≤0.2 ohm RELEASE
TIME: 30 ms max
RELIEF TIME ON TRIGGER: 5 ms max. RAISE
TIME: 14 ms max
RELEASE TIME ON RELEASE: 9 ms max

INSULATION RESISTANCE
200 MOhm – in norm. climatic conditions
20 MOhm – at maximum temperature
10 MOhm – at high humidity

ELECTRICAL INSULATION STRENGTH
2000 V – at norm. climatic conditions
1200 V – at high humidity
1000 V – at reduced atm. pressure

VIBRATION RESISTANCE: from 5 to 50 Hz with an amplitude of up to 1.5 mm
over 50 to 200 Hz with acceleration up to 50 m / s2 (5g)
over 200 to 600 Hz with acceleration up to 30 m / s2 (3g)
over 600 to 2000 Hz with acceleration up to 50 m / s2 (5g)

IMPACT RESISTANCE: up to 35g.
AMBIENT TEMPERATURE: from 213K (-60 ° C) to 358K (+ 85 ° C).
RELATIVE HUMIDITY: up to 98% at 313K (+ 40 ° C)
ATMOSPHERIC PRESSURE: from 53200 Pa (400 mm Hg) to 122360 Pa (920 mm Hg)

Table 1. Basic electrical parameters

Table 2. Switching mode